Performs COMPLEX production assembly operations on structural parts, mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual or automated assembly tools.

Top 3-5 Technical/Software Skills needed to perform this role (Charleston, South Carolina) 
• Use of various structural assembly tools such as Hi-speed and Lo-speed drills, Pneumatic and electric drills, nut runner and Quackenbush.
• Set up and validate jigs and other tooling setup.
• Perform close tolerance drilling and installations in critical aircraft structural areas.
• Use of calibrated precision measuring tools.
• Perform various fastener installation/removal tools and techniques.
• Work with CFRP, aluminum and titanium for structural drilling, sanding, trimming and shimming.

Requirements/Years of experience/Etc.
• 7 years or more experience in aviation/aerospace
• 7 years or more experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications.
• 7 years or more experience utilizing and following detailed work instructions, reading, and interpreting blueprints, drawings, or specifications, in English.
• 7 years or more experience in an advanced manufacturing, technical, or mechanical field performing work with basic hand, power, and/or pneumatic (air) tools.
• 7 years or more experience with structural parts fabrication, assembly processes and procedures.

Physical demands (if any):
1. Ability to meet physical demands of the role such as: flexion/extension (head bent down, head bent back), handling, kneeling, bending at the waist, reaching (overhead), rotation of head/neck, standing, twisting at the waist and walking, climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), crawling, crouching (squatting).
2. Carry/Lift up to 35 pounds.
3. Ability to work with High Hazard Chemicals.

8-10 Weeks of Training in Charleston, South Carolina 

Please note – These positions are variable shifts, contractors must be able to work 1st, 2nd or 3rd shift. Shift dependent on business need.
Building location dependent on business need.

Successful completion and clearance of all screening requirements is a contingency for this assignment.
Please be advised that your contractor may perform duties outside of their requisition SOW until they begin their scheduled training class

**3 failed assessments results in release
Successful completion of training is a contingency for this assignment – OJT or formal classroom training

Here’s your chance to join the world’s largest aircraft manufacturer in North Charleston South Carolina. Come enjoy Charleston’s history, dining, beaches and recreational opportunities.

Performs ROUTINE production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

Top 3-5 Technical/Software Skills needed to perform this role
• Use of various structural assembly tools such as Hi-speed and Lo-speed drills, Pneumatic and electric drills, nut runner and Quackenbush.
• Set up and validate jigs and other tooling setup.
• Perform close tolerance drilling and installations in critical aircraft structural areas.
• Use of calibrated precision measuring tools.
• Perform various fastener installation/removal tools and techniques.
• Work with CFRP, aluminum and titanium for structural drilling, sanding, trimming and shimming.

Requirements/Years of experience/Etc.
• 6 months or more experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications.
• 6 months or more experience utilizing and following detailed work instructions, reading, and interpreting blueprints, drawings, or specifications, in English.
• 6 months or more experience in an advanced manufacturing, technical, or mechanical field performing work with basic hand, power, and/or pneumatic (air) tools.
• 6 months or more experience with structural parts fabrication, assembly processes and procedures.

Physical demands (if any):
1. Ability to meet physical demands of the role such as: flexion/extension (head bent down, head bent back), handling, kneeling, bending at the waist, reaching (overhead), rotation of head/neck, standing, twisting at the waist and walking, climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), crawling, crouching (squatting).
2. Carry/Lift up to 35 pounds.
3. Ability to work with High Hazard Chemicals.

8-10 Weeks of Training

Please note – These positions are variable shifts, contractors must be able to work 1st, 2nd or 3rd shift. Shift dependent on business need.

South Carolina Site Requisition – Airport and North Campus SOW Business need.

Building location dependent on business need.

Successful completion and clearance of all screening requirements is a contingency for this assignment.

1+ years of experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, or specifications, in English.
Please be advised that your contractor may perform duties outside of their requisition SOW until they begin their scheduled training class

**3 failed assessments results in release
Successful completion of training is a contingency for this assignment – OJT or formal classroom training

Performs COMPLEX production assembly operations on structural parts, mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual or automated assembly tools.

Top 3-5 Technical/Software Skills needed to perform this role
• Use of various structural assembly tools such as Hi-speed and Lo-speed drills, Pneumatic and electric drills, nut runner and Quackenbush.
• Set up and validate jigs and other tooling setup.
• Perform close tolerance drilling and installations in critical aircraft structural areas.
• Use of calibrated precision measuring tools.
• Perform various fastener installation/removal tools and techniques.
• Work with CFRP, aluminum and titanium for structural drilling, sanding, trimming and shimming.

Requirements/Years of experience/Etc.
• 7 years or more experience in aviation/aerospace
• 7 years or more experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications.
• 7 years or more experience utilizing and following detailed work instructions, reading, and interpreting blueprints, drawings, or specifications, in English.
• 7 years or more experience in an advanced manufacturing, technical, or mechanical field performing work with basic hand, power, and/or pneumatic (air) tools.
• 7 years or more experience with structural parts fabrication, assembly processes and procedures.

Physical demands (if any):
1. Ability to meet physical demands of the role such as: flexion/extension (head bent down, head bent back), handling, kneeling, bending at the waist, reaching (overhead), rotation of head/neck, standing, twisting at the waist and walking, climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), crawling, crouching (squatting).
2. Carry/Lift up to 35 pounds.
3. Ability to work with High Hazard Chemicals.

8-10 Weeks of Training

Please note – These positions are variable shifts, contractors must be able to work 1st, 2nd or 3rd shift. Shift dependent on business need.
Building location dependent on business need.

Successful completion and clearance of all screening requirements is a contingency for this assignment.
Please be advised that your contractor may perform duties outside of their requisition SOW until they begin their scheduled training class

**3 failed assessments results in release
Successful completion of training is a contingency for this assignment – OJT or formal classroom training

Performs ROUTINE production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

Top 3-5 Technical/Software Skills needed to perform this role (Charleston, South Carolina)
• Use of various structural assembly tools such as Hi-speed and Lo-speed drills, Pneumatic and electric drills, nut runner and Quackenbush.
• Set up and validate jigs and other tooling setup.
• Perform close tolerance drilling and installations in critical aircraft structural areas.
• Use of calibrated precision measuring tools.
• Perform various fastener installation/removal tools and techniques.
• Work with CFRP, aluminum and titanium for structural drilling, sanding, trimming and shimming.

Requirements/Years of experience/Etc.
• 6 months or more experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications.
• 6 months or more experience utilizing and following detailed work instructions, reading, and interpreting blueprints, drawings, or specifications, in English.
• 6 months or more experience in an advanced manufacturing, technical, or mechanical field performing work with basic hand, power, and/or pneumatic (air) tools.
• 6 months or more experience with structural parts fabrication, assembly processes and procedures.

Physical demands (if any):
1. Ability to meet physical demands of the role such as: flexion/extension (head bent down, head bent back), handling, kneeling, bending at the waist, reaching (overhead), rotation of head/neck, standing, twisting at the waist and walking, climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), crawling, crouching (squatting).
2. Carry/Lift up to 35 pounds.
3. Ability to work with High Hazard Chemicals.

8-10 Weeks of Training in Charleston, South Carolina)

Please note – These positions are variable shifts, contractors must be able to work 1st, 2nd or 3rd shift. Shift dependent on business need.

South Carolina Site Requisition – Airport and North Campus SOW Business need.

Building location dependent on business need.

Successful completion and clearance of all screening requirements is a contingency for this assignment.

1+ years of experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, or specifications, in English.
Please be advised that your contractor may perform duties outside of their requisition SOW until they begin their scheduled training class

**3 failed assessments results in release
Successful completion of training is a contingency for this assignment – OJT or formal classroom training

Performs COMPLEX production assembly operations on structural parts, mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual or automated assembly tools.

Top 3-5 Technical/Software Skills needed to perform this role
• Use of various structural assembly tools such as Hi-speed and Lo-speed drills, Pneumatic and electric drills, nut runner and Quackenbush.
• Set up and validate jigs and other tooling setup.
• Perform close tolerance drilling and installations in critical aircraft structural areas.
• Use of calibrated precision measuring tools.
• Perform various fastener installation/removal tools and techniques.
• Work with CFRP, aluminum and titanium for structural drilling, sanding, trimming and shimming.

Requirements/Years of experience/Etc.
• 7 years or more experience in aviation/aerospace
• 7 years or more experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications.
• 7 years or more experience utilizing and following detailed work instructions, reading, and interpreting blueprints, drawings, or specifications, in English.
• 7 years or more experience in an advanced manufacturing, technical, or mechanical field performing work with basic hand, power, and/or pneumatic (air) tools.
• 7 years or more experience with structural parts fabrication, assembly processes and procedures.

Physical demands (if any):
1. Ability to meet physical demands of the role such as: flexion/extension (head bent down, head bent back), handling, kneeling, bending at the waist, reaching (overhead), rotation of head/neck, standing, twisting at the waist and walking, climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), crawling, crouching (squatting).
2. Carry/Lift up to 35 pounds.
3. Ability to work with High Hazard Chemicals.

8-10 Weeks of Training

Please note – These positions are variable shifts, contractors must be able to work 1st, 2nd or 3rd shift. Shift dependent on business need.
Building location dependent on business need.

Successful completion and clearance of all screening requirements is a contingency for this assignment.
Please be advised that your contractor may perform duties outside of their requisition SOW until they begin their scheduled training class

**3 failed assessments results in release
Successful completion of training is a contingency for this assignment – OJT or formal classroom training